All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: |
Maintain routine tailings dam performance records |
SAQA US ID | UNIT STANDARD TITLE | |||
9731 | Maintain routine tailings dam performance records | |||
ORIGINATOR | ||||
SGB Mining and Minerals | ||||
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
- | ||||
FIELD | SUBFIELD | |||
Field 06 - Manufacturing, Engineering and Technology | Fabrication and Extraction | |||
ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
Undefined | Regular | Level 3 | NQF Level 03 | 4 |
REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
Passed the End Date - Status was "Reregistered" |
2005-04-13 | 2008-04-13 | SAQA 0859/05 | |
LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
2009-04-13 | 2012-04-13 |
In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard is replaced by: |
US ID | Unit Standard Title | Pre-2009 NQF Level | NQF Level | Credits | Replacement Status |
256696 | Maintain routine tailings dam performance records | Level 3 | NQF Level 03 | 4 |
PURPOSE OF THE UNIT STANDARD |
This unit standard is for persons responsible for maintaining routine tailings dam performance records. A person credited with this unit standard can:
|
LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
Literacy and numeracy at ABET 4 or equivalent.
Competence in the following: |
UNIT STANDARD RANGE |
None |
Specific Outcomes and Assessment Criteria: |
SPECIFIC OUTCOME 1 |
Maintain routine tailings dam performance records. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
1. Demonstrate knowledge relating to the maintaining of routine tailing dam performance records. |
ASSESSMENT CRITERION 2 |
2. Prepare to measure routine performance. |
ASSESSMENT CRITERION 3 |
3. Conduct routine performance inspection. |
ASSESSMENT CRITERION 4 |
4. Complete duties pertaining to the maintaining of a daily logbook |
SPECIFIC OUTCOME 2 |
Demonstrate knowledge relating to the maintaining of routine tailings dam performance records. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
1. The legal and specified requirements pertaining to a safe, healthy work environment on a tailings dam and the consequences of not adhering to the above are explained. |
ASSESSMENT CRITERION 2 |
2. The importance of maintaining routine tailings dam performance records in terms of achieving specified production requirements is explained. |
ASSESSMENT CRITERION 3 |
3. Hazards and associated risks, pertaining to the tailings dam operation process, identified through specified risk assessment procedures, and the actions to be taken should they be encountered, are explained. |
ASSESSMENT CRITERION 4 |
4. The principal components and the specifications of the measuring and recording process are identified and their functions explained. |
ASSESSMENT CRITERION RANGE |
Must include:
|
ASSESSMENT CRITERION 5 |
5. The specified communication requirements pertaining to the maintaining of routine performance records and consequences of non-compliance are explained. |
ASSESSMENT CRITERION 6 |
6. The actions to be taken, should specified sub-standard conditions and problems be encountered, are explained. |
SPECIFIC OUTCOME 3 |
Prepare to measure routine performance. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
1. Personal protective and safety equipment is verified, examined and used in accordance with specified requirements. |
ASSESSMENT CRITERION 2 |
2. Specified measuring equipment is verified and examined in accordance with specified requirements. |
ASSESSMENT CRITERION 3 |
3. Workplace hazards and associated risks are dealt with in accordance with specified requirements. |
ASSESSMENT CRITERION 4 |
4. Safety and health procedures towards self and others are maintained in accordance with specified requirements. |
SPECIFIC OUTCOME 4 |
Conduct routine performance inspection. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
1. Personal protective and safety equipment is used in accordance with specified requirements. |
ASSESSMENT CRITERION 2 |
2. Measuring equipment is used in accordance with specified requirements. |
ASSESSMENT CRITERION 3 |
3. The condition of each component is observed and recorded in accordance with specified requirements. |
ASSESSMENT CRITERION 4 |
4. Work related hazards and associated risks are dealt with in accordance with specified requirements. |
ASSESSMENT CRITERION 5 |
5. Problems encountered are dealt with in accordance with specified requirements. |
ASSESSMENT CRITERION 6 |
6. The performance recording process is consistent with environmental policy and other specified requirements. |
ASSESSMENT CRITERION 7 |
7. Safety and health procedures towards self and others are maintained in accordance with specified requirements. |
SPECIFIC OUTCOME 5 |
Complete duties pertaining to the maintaining of a daily logbook. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
1. Personal protective and safety equipment is dealt with in accordance with specified requirements. |
ASSESSMENT CRITERION 2 |
2. Measuring equipment is dealt with in accordance with specified requirements. |
ASSESSMENT CRITERION 3 |
3. Good housekeeping practices are maintained in accordance with specified requirements. |
UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
1. Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
2. Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA. 3. Moderation of assessment will be overseen by the relevant ETQA according the moderation guidelines in the relevant qualification and the agreed ETQA procedures. |
UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
Embedded knowledge is addressed in specific outcome `Demonstrate knowledge relating to the maintaining of routine tailings dam performance records`, as well as other assessment criteria throughout the unit standard. |
UNIT STANDARD DEVELOPMENTAL OUTCOME |
N/A |
UNIT STANDARD LINKAGES |
N/A |
Critical Cross-field Outcomes (CCFO): |
UNIT STANDARD CCFO IDENTIFYING |
Solve problems. |
UNIT STANDARD CCFO WORKING |
Work effectively with others as a member of a team/group/organisation/community. |
UNIT STANDARD CCFO ORGANISING |
Organise and manage oneself and one`s activities responsibly and effectively. |
UNIT STANDARD CCFO COLLECTING |
Collect, organise and critically evaluate information. |
UNIT STANDARD CCFO COMMUNICATING |
Communicate effectively using visual, mathematics and language skills in the modes of oral and written presentations. |
UNIT STANDARD CCFO SCIENCE |
Use science and technology effectively and critically (showing responsibility towards the environment and health of others). |
UNIT STANDARD CCFO DEMONSTRATING |
Demonstrate an understanding of the world as a set of related systems. |
UNIT STANDARD ASSESSOR CRITERIA |
N/A |
UNIT STANDARD NOTES |
This unit standard has been replaced by unit standard 256696, which is "Maintain routine tailings dam performance records", Level 3, 4 credits.
Terminology: 1. Specified Requirements include Legal Requirements and are contained in one or more of the following documents: 2. Tailings - the waste residue generated by mines and industries after the recovery of the desirable commodities. 3. Tailings dam - the repository where the tailings are deposited for disposal. |
QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
Elective | 49044 | National Certificate: Mineral Processing, Gold Extraction | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2008-08-20 | Was MQA until Last Date for Achievement |
PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
NONE |
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |