SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Complete a product change over to a fibre finishing process 
SAQA US ID UNIT STANDARD TITLE
7293  Complete a product change over to a fibre finishing process 
ORIGINATOR
SGB Textiles 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Engineering and Related Design 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  30 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2006-07-04  2009-07-04  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2010-07-04   2013-07-04  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners credited with this standard will be able to prepare to do a product change of a fibre finishing process, perform a product change of a fibre finishing process, achieve normal process conditions, confirm achievement of product specifications and manage emergency and abnormal conditions. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
Appropriate credits from Textiles Qualification NQF Level 2. 

UNIT STANDARD RANGE 
This standard will include processes of drawing, twisting, texturising, crimping, conditioning and drying-heat setting. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Prepare to do a product change over of a fibre finishing process 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
1. Appropriate authorisation, as per in company procedure and legislation, is obtained (permit to work, clearance certificates production control instructions) prior to performing a product changeover. 

ASSESSMENT CRITERION 2 
2. Appropriate specified documentation is obtained (product / process specifications). 

ASSESSMENT CRITERION 3 
3. Process specifications are interpreted and correctness verified in order to determine required actions. 

ASSESSMENT CRITERION 4 
4. A plan, in accordance with normal work practices, is in place and specific tasks are allocated to team members. 

ASSESSMENT CRITERION 5 
5. Adequate resources, as per procedures, are allocated. 

ASSESSMENT CRITERION 6 
6. Team members are informed, as per standard operating practices, and are ready to perform their required activities. 

ASSESSMENT CRITERION 7 
7. Raw materials coming from previous processes are verified for correctness, as per specification, and are available. 

SPECIFIC OUTCOME 2 
Perform a product change over of a fibre finishing process 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
1. Adjustments, in line with new product specifications and operating conditions, are made and double checked (pressures, temperatures, speeds). 

ASSESSMENT CRITERION 2 
2. Product and services routes are set, adjusted and confirmed in accordance with required product specifications. 

SPECIFIC OUTCOME 3 
Achieve normal process conditions 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
1. A logical scanning routine, as per in company specification, is used in order to achieve required process conditions. 

ASSESSMENT CRITERION 2 
2. Normal operating conditions are achieved within the defined time scale for the process and prevailing conditions with reference to specified procedure. 

ASSESSMENT CRITERION 3 
3. Specified actions (within scope of authority) are taken to identify and eliminate the cause/s of abnormal process conditions. 

SPECIFIC OUTCOME 4 
Confirm achievement of product specification 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
1. Samples are taken and quality checks are carried out / initiated in accordance with normal work practices and specifications. 

ASSESSMENT CRITERION 2 
2. Product is checked using test equipment as per laid down procedures. 

ASSESSMENT CRITERION 3 
3. Results of tests are interpreted and appropriate actions, as specified in the relevant procedures, are taken to identify and eliminate the cause of non conforming product. 

ASSESSMENT CRITERION 4 
4. Product properties are within laid down specifications. 

ASSESSMENT CRITERION 5 
5. Wastage, of time and materials, is within laid down specifications. 

ASSESSMENT CRITERION 6 
6. Specified information is recorded accurately and legibly onto relevant documentation and/or entered into specified computer programme timeously and accurately. 

SPECIFIC OUTCOME 5 
Manage emergency and abnormal conditions 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
1. Possible impact of abnormalities / emergencies on other areas are identified and relevant personnel, in line with laid down procedures, are timeously informed. 

ASSESSMENT CRITERION 2 
2. Incidents, hazardous conditions and emergencies are reported, timeously as per specified procedures. 

ASSESSMENT CRITERION 3 
3. Nature, location and scope of incident is verified when an incident is reported, verbally or in writing. 

ASSESSMENT CRITERION 4 
4. Specified alarms are raised immediately on discovery of the emergency. 

ASSESSMENT CRITERION 5 
5. Plant emergency procedure is followed according to nature and severity of incident. 

ASSESSMENT CRITERION 6 
6. Plant incident specified report procedure is accurately followed. 

ASSESSMENT CRITERION 7 
7. Full and accurate information is given to appropriate person/s as per company standard operating procedure. 

ASSESSMENT CRITERION 8 
8. Accurate and legible reports are prepared and submitted as per company procedures. 

ASSESSMENT CRITERION 9 
9. Faults within own scope of authority are promptly identified and attended to and faults outside scope of authority are promptly identified, reported and followed up within specified time and authority limits. 


UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
Appropriate ETQAs within the Engineering Manufacturing and Technology field and the Education and Training Board for the Textile Industry will accredit providers and assessors. 

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
Learners will engage with the following knowledge components:
  • Explain the importance of specifications and the interpretation thereof.
  • Reasons for conducting tests are explained.
  • Demonstrate an understanding of productivity and quality critical aspects of the change over process.
  • Demonstrate an understanding of the procedures to be followed when making settings and adjustments to process and equipment conditions.
  • Read and understand applicable work instructions.
  • Demonstrate an understanding of the importance of recognising faults and the need for appropriate action to be taken.
  • Demonstrate an understanding of appropriate methodologies and techniques for conducting tests on products to ensure specification changes have been met.
  • Identify and relate all materials used in processes.
  • Demonstrate an in depth understanding of machines and processes of adjusting and setting as they apply to product change over. 
    		•


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems relating to conducting product changeovers. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others to ensure that appropriate raw materials coming from previous processes are available and are to specification. 

    UNIT STANDARD CCFO ORGANISING 
    Analyse and organise information in order to interpret specifications.

    Organise ones activities to ensure all required settings and adjustments are made as a result of the new specification and to ensure that procedures for process change overs are followed. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively in order to ensure co-ordination of product change over activities. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology to carry out product tests to ensure new product meets specification. 

    UNIT STANDARD CCFO CONTRIBUTING 
    Understand the world as being made up of a set of related systems where it is recognised that problems do not occur in isolation. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  50560   Further Education and Training Certificate: Small Craft Construction  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered"     		 2009-08-31  Was MERSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.