SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Operate a container side loader 
SAQA US ID UNIT STANDARD TITLE
260777  Operate a container side loader 
ORIGINATOR
SGB Generic Manufacturing, Engineering, Technology 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Engineering and Related Design 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  8 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Operating a lifting machine takes place within a regulatory framework that seeks to ensure safety of the operator, the lifting machine and the lifting machine environment. Container side loaders are inherently dangerous; hence, their safe operation cannot be overstated. The learner will also acquire the competencies and skills to operate the components, systems and levers to accomplish the task of lifting and handling loads appropriately. The aspects of safety and communication during the lifting operation are covered.

It is important that the learners operate Container side loader using the competencies in this Unit Standard and in keeping with the requirements of the National Code of Practice (NCOP) for the Evaluation of Training Providers for Lifting Machine Operators (Government Gazette 27292 - 18 February 2005).

Learners credited with this standard will be capable of:
  • Demonstrating knowledge of the regulatory framework for operating a container side loader.
  • Describing the container side loader to be operated.
  • Demonstrating mechanical awareness of the container side loader.
  • Inspecting the container side loader.
  • Handling loads with a container side loader. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
  • Communication at NQF Level 3.
  • Mathematical Literacy at NQF Level 3. 
    		•

    UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of the regulatory framework for operating a container side loader. 
    OUTCOME RANGE 
    Includes but is not limited to relevant sections of the Occupational Health and Safety Act (Sections 8, 13 and 14), General Safety Regulation 2, General Safety Regulation 9 and Driven Machinery Regulations 18. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The responsibility of the employer and employees regarding health and safety are explained in terms of the legal obligations on both parties. 

    ASSESSMENT CRITERION 2 
    The importance of the right to information is explained to ensure that health and safety issues are not compromised. 

    ASSESSMENT CRITERION 3 
    The regulations pertaining to personal protective equipment (PPE) are explained to ensure that appropriate precautions are taken in the workplace. 

    ASSESSMENT CRITERION 4 
    The regulation pertaining to stacking is explained to ensure safety of self and others. 

    ASSESSMENT CRITERION 5 
    The regulation pertaining to driven machines are explained to maintain the safety of the lifting machine environment. 

    ASSESSMENT CRITERION 6 
    The code of practice and safety procedures of the organisation are evaluated to ascertain whether they are in conformity with the regulatory framework for lifting machines. 

    SPECIFIC OUTCOME 2 
    Describe the container side loader to be operated. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The container side loader is described in terms of the different types of lifting machines in a category. 
    ASSESSMENT CRITERION RANGE 
    Types refers to the various types of cranes within the crane category, in terms of the NCOP.
     

    ASSESSMENT CRITERION 2 
    The container side loader is described in terms of its functionality and the context within which it can be operated to achieve specified work requirements. 

    ASSESSMENT CRITERION 3 
    The container side loader is analysed in terms of its limitations, capabilities and capacities for the required application. 

    SPECIFIC OUTCOME 3 
    Demonstrate mechanical awareness of the container side loader. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The major components of the container side loader are identified and described in terms of their functions in the operation of the machine. 

    ASSESSMENT CRITERION 2 
    The systems of the container side loader are described in terms of their features, functions and inter-relatedness. 

    ASSESSMENT CRITERION 3 
    The instrumentation of the lifting machine is explained in terms of their functions and what the operator must do in case of a deviation. 
    ASSESSMENT CRITERION RANGE 
    Instrumentation includes gauges, indicators, warning devices.
     

    ASSESSMENT CRITERION 4 
    The operation of the levers, controls and safety devices is conducted appropriately in order to maintain safety during operations. 

    ASSESSMENT CRITERION 5 
    The attachments of the container side loader are used as per manufacturer's instruction and standard operating procedure. 

    SPECIFIC OUTCOME 4 
    Inspect the container side loader. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Pre-start checks are conducted in accordance with manufacturer specifications to ensure that the machine is safe for operation. 

    ASSESSMENT CRITERION 2 
    The container side loader is started-up according to manufacturer's instructions. 

    ASSESSMENT CRITERION 3 
    Shut down procedures are performed that ensure the machine is serviceable for the next operator/shift. 

    ASSESSMENT CRITERION 4 
    The lifting machine is maintained according to manufacturer's instructions and standard operating procedure. 

    ASSESSMENT CRITERION 5 
    Problems are recorded and reported according to workplace standard operating procedures. 

    SPECIFIC OUTCOME 5 
    Handle loads with a container side loader. 
    OUTCOME RANGE 
    Handle includes identifying, lifting, transporting, stacking and storing. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The physical properties of a load are identified and described according to specific criteria for classification of the load. 
    ASSESSMENT CRITERION RANGE 
    Criteria include but are not limited to density, dimensions, centre of gravity, temperature, stability of a suspended load.
     

    ASSESSMENT CRITERION 2 
    The appropriate attachment for the load type is selected and used as per manufacturer's instructions. 

    ASSESSMENT CRITERION 3 
    Specific loads are handled according to standard operating procedures. 

    ASSESSMENT CRITERION 4 
    The operational capability of the machine is assessed in terms of efficiency and safety of operation. 

    ASSESSMENT CRITERION 5 
    The load is handled in such a way as to ensure that safe operating procedures are complied with to ensure safety of people, machines and the environment. 
    ASSESSMENT CRITERION RANGE 
    Procedures include emergency procedures, procedures to deal with hazardous materials if being transported or handled, stacking procedures.
     

    ASSESSMENT CRITERION 6 
    The machine is operated within its load capacity. 

    ASSESSMENT CRITERION 7 
    Communication skills are used to lift, move and release the load in accordance with workplace accepted timeframes. 
    ASSESSMENT CRITERION RANGE 
    Communication skills include BAT, radio, hand, semaphore.
     


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this Unit Standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Unit Standard must be accredited as a provider with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQA policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual Unit Standards as well as the integrated competence described in the qualification. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Legislation and Regulations.
  • Components, systems, instrumentation, levers, controls and warning devices of lifting machines.
  • Principles of leverage, centre of gravity.
  • Types of lift trucks.
  • Limitations, capabilities and capacities of the container side loader.
  • Principles and properties of loads.
  • Safety operating procedures.
  • Communication skills. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems in which responses display that responsible decisions using critical and creative thinking have been made when:
  • Identifying the container side loader for application.
  • Dealing with problems pertaining to the lifting machine. 
    		•

    UNIT STANDARD CCFO WORKING 
    Work effectively with other as a member of a team, group, organisation, community to:
  • Ensure that container side loader is fit for operation.
  • Operate the container side loader. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsively and effectively when:
  • Demonstrating knowledge of the regulatory framework for lifting machines.
  • Selecting the container side loader for a particular lifting application.
  • Identifying and describing the systems, instrumentation, levers, control and safety devices of the lifting machine.
  • Conducting inspections.
  • Recording and reporting problems of the lifting machine.
  • Handling loads with the machines.
  • Operating the lifting machine.
  • Using communication skills. 
    		•

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information to:
  • Select a container side loader.
  • Handle loads according to standard operating procedure.
  • Operate the lifting machine safely. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively using visual, mathematical and/or language skills in the modes of oral and/or written presentation to:
  • Lift and move loads. 
    		•

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, showing responsibility towards the environment and the health of others by:
  • Inspecting and using the container side loader according to manufacturer's instructions. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  48794   National Certificate in Quality Checking of Tyres and Tyre Components  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  71989   National Certificate: Automotive Components: Manufacturing and Assembly  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  58862   National Certificate: Electro-Mechanical Winding  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  58720   National Certificate: Engineering Fabrication  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  64829   National Certificate: Lifting Machine Operations  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  TETA 
    Elective  23255   National Certificate: Mechanical Engineering: Fitting and Machining  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  91926   National Certificate: Mechanical Engineering: Machining and Tooling  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  67609   National Certificate: Mechatronics  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  79666   National Certificate: Metal and Engineering Manufacturing Processes  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  64190   National Certificate: Metals Production  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  49449   National Certificate: Plastics Manufacturing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  36155   National Certificate: Polymer Composite Fabrication  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  79407   National Certificate: Polymer Compound Manufacturing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  21012   National Certificate: Power and Telecommunication Cable Manufacturing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  24217   National Certificate: Thermoplastic Fabrication  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  48798   National Certificate: Tyre and Tyre Component Manufacturing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  48795   National Certificate: Tyre Assembly  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  57886   National Certificate: Welding Application and Practice  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Exclusive Training and Services 
    2. Exclusive Training Services 
    3. He and She Driver Training Centre 
    4. LB Training Solutions 
    5. MCMEGZ Training 
    6. Watch Tower Bible & Tract Society of SA 
    7. Wheelman S A 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.