SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Demonstrate GIS Software skills with an additional package 
SAQA US ID UNIT STANDARD TITLE
258756  Demonstrate GIS Software skills with an additional package 
ORIGINATOR
SGB Geographical Information Sciences 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Physical Planning, Design and Management 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 6  Level TBA: Pre-2009 was L6  2 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard has been developed for the GIS occupational area and is intended for persons who aim to achieve career advancement by gaining GIS skills leading to qualification based on unit standards. A person who has successfully completed this unit standard will be able to have a broad view of GIS technologies available.

A person credited with this unit standard is able to:
  • Launch application and access spatial information.
  • Perform basic queries and data manipulation.
  • Produce basic output. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credit calculation is based on the assumption that learners are already competent in terms of the following:
  • Achieve a basic knowledge of vector GIS software functions.
  • Communication at NQF Level 5.
  • Mathematical Literacy at NQF Level 5. 
    		•

    UNIT STANDARD RANGE 
    Specific range statements are provided in the body of the unit standard where they apply to particular specific outcomes or assessment criteria. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Launch application and access spatial information. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The geographical area is defined in terms of the relevant GIS software. 
    ASSESSMENT CRITERION RANGE 
    Projection parameters, limits, datum.
     

    ASSESSMENT CRITERION 2 
    Several feature types are accessed in the GIS software. 

    ASSESSMENT CRITERION 3 
    Spatial Data are displayed appropriately in relation to selected spatial entities. 
    ASSESSMENT CRITERION RANGE 
    Colour, width, display order, symbology.
     

    ASSESSMENT CRITERION 4 
    Attribute data are successfully accessed for specific spatial data instances. 

    SPECIFIC OUTCOME 2 
    Perform basic queries and data manipulation. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Spatial data are selected according to spatial selection parameters. 
    ASSESSMENT CRITERION RANGE 
    Including but not limited to Inside or crossing line's or polygons or circles or windows, proximity, intersections, unions, display parameters, layers.
     

    ASSESSMENT CRITERION 2 
    Spatial data are selected according to attribute selection parameters. 
    ASSESSMENT CRITERION RANGE 
    Attribute data from data bases.
     

    ASSESSMENT CRITERION 3 
    Spatial data are selected by a combination of spatial and attribute selection parameters. 

    ASSESSMENT CRITERION 4 
    Basic queries are performed to illustrate GIS software skills. 
    ASSESSMENT CRITERION RANGE 
    Find, extract information by pointing, extract by using a selection.
     

    ASSESSMENT CRITERION 5 
    Data are re-classified according to application requirements. 
    ASSESSMENT CRITERION RANGE 
    Include but not limited to hard and soft copy maps, charts, graphs, text reports etc.
     

    SPECIFIC OUTCOME 3 
    Produce basic output. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Output consists of all relevant information according to user requirements. 

    ASSESSMENT CRITERION 2 
    GI Output is produced using pre-defined templates. 

    ASSESSMENT CRITERION 3 
    GI Output is produced using correct annotation and to scale. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines and the agreed ETQA procedures. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Essential embedded knowledge will be assessed through assessment of the specific outcomes in terms of the stipulated assessment criteria. Candidates are unlikely to achieve all the specific outcomes, to the standards described in the assessment criteria, without knowledge of the listed embedded knowledge. This means that for the most part, the possession or lack of the knowledge can be directly inferred from the quality of the candidate's performance. Where direct assessment of knowledge is required, assessment criteria have been included in the body of the unit standard. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Solve problems. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team/group/organisation or community. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one`s activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, organise and critically evaluate information. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively using visual, mathematics and language skills in the modes of oral and written presentations. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically (showing responsibility towards the environment and health of others). 

    UNIT STANDARD CCFO DEMONSTRATING 
    Display an understanding of the world as a set of related systems. 

    UNIT STANDARD CCFO CONTRIBUTING 
    Contribute to the full development of each learner and the social and economic development of society at large. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Notes to Assessors:
  • This unit standard is based on: Achieve a basic knowledge of vector GIS software functions.
  • The reason for demanding a second application is to allow students to see the GIS world from a wider perspective. This unit standard should therefore not be underestimated or treated flippantly. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  63689   Bachelor of Arts: Geographical Information Science  Level 6  Level TBA: Pre-2009 was L6  Passed the End Date -
    Status was "Reregistered"     		 2018-06-30   
    Core  63711   Bachelor of Geographical Information Science (GISc)  Level 7  NQF Level 07  Passed the End Date -
    Status was "Reregistered"     		 2018-06-30   


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.