SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Perform a pre-delivery quality assurance inspection 
SAQA US ID UNIT STANDARD TITLE
244172  Perform a pre-delivery quality assurance inspection 
ORIGINATOR
SGB Vehicle Maintenance 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
People in the field of manufacturing and engineering require the skills, values and knowledge reflected in this unit standard. The learning outcomes in this unit standard also contribute to the exit level outcomes required for various manufacturing and engineering qualifications. The learner is capable of evaluating a completed job against quality assurance criteria prior to delivery to the customer. This will contribute to the exit level outcomes required for the National Certificate in automotive repair and maintenance at NQF Level 3 and related qualifications. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression. It is one of a series of unit standards for maintaining vehicles in the field of manufacturing and engineering. It is assumed that the learner has already learned to foster and maintain customer relations. 

UNIT STANDARD RANGE 
The ranges as indicated under the specific outcomes determine the scope and level of this unit standard.

All work is performed with little or no supervision in accordance with operational, repair manual specifications and procedures and in compliance with occupational safety, health and environmental legislation. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Collate all the relevant task information. 
OUTCOME RANGE 
  • The relevant task information includes records and data, industry standards and original equipment manufacturers' specifications.
  • Records and data includes vehicle check-in list, quotes, job cards, sublet reports and invoices. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Relevant information required is identified in relation to the task requirements. 

    ASSESSMENT CRITERION 2 
    Relevant information is sourced in accordance with workplace requirements. 

    ASSESSMENT CRITERION 3 
    The purpose of all relevant information is explained in relation to the quality assurance inspection. 

    ASSESSMENT CRITERION 4 
    All documentation is collated and checked for applicability to the job. 

    SPECIFIC OUTCOME 2 
    Perform a post repair inspection. 
    OUTCOME RANGE 
  • The inspection may include a physical inspection, to compare the repairs to records and industry standards and to perform operational checks and road tests.
  • Report includes compiling and submitting a quality assurance report.
  • The report to include to confirmation of the repairs, recommendations and deviations. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The inspection is carried out in accordance with work place requirements. 

    ASSESSMENT CRITERION 2 
    Any defects observed are reported and corrected in accordance with workplace procedures. 

    ASSESSMENT CRITERION 3 
    Defects noted that were not part of the repair are recorded and reported to the customer in accordance with workplace procedures. 

    ASSESSMENT CRITERION 4 
    The repair is confirmed to be in accordance with industry standards and customer requirements. 

    SPECIFIC OUTCOME 3 
    Hand over the vehicle to the client. 
    OUTCOME RANGE 
  • Hand over includes liaison with the client and completing all the relevant documentation. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The client is notified when to collect the vehicle timeously. 

    ASSESSMENT CRITERION 2 
    The vehicle is ready for collection at the agreed time. 

    ASSESSMENT CRITERION 3 
    The repair and any defects reported are shown to the client. 

    ASSESSMENT CRITERION 4 
    Relevant documentation is completed and authorised in accordance with workplace procedures. 

    SPECIFIC OUTCOME 4 
    Apply safety procedures during quality assurance inspections. 
    OUTCOME RANGE 
  • Safety includes using personal protective equipment, adhering to workplace procedures and ensuring customer safety in the workplace. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The workplace is free of obstructions and hazards. 

    ASSESSMENT CRITERION 2 
    There is no risk of injury to the client when collecting and inspecting the vehicle. 

    ASSESSMENT CRITERION 3 
    All workplace safety warnings and required actions before, during and after the inspection are adhered to. 

    ASSESSMENT CRITERION 4 
    Applicable SHE procedures are followed during the inspection. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines and the agreed ETQA procedures. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names and functions of:
  • Inspection methods.
  • Relevant documentation.

    Attributes, descriptions, characteristics and properties:
  • Types of defects.
  • Typical problems that can be encountered during inspections.

    Sensory cues:
  • Visual, audible, feel, smell.

    Purpose of:
  • Conducting quality inspections.
  • Adhering to workplace procedures.
  • Treating the customer courteously.

    Regulations, legislation, agreements, policies, standards:
  • Applicable company policies and procedures.
  • Manufacturer specifications.
  • SHE procedures.
  • Quality procedures.

    Theory; rules, principles, laws:
  • Optical illusions (flip tones).

    Relationships, systems:
  • Maintaining a good customer relationship. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Related to quality inspections. 
    		•

    UNIT STANDARD CCFO WORKING 
    Work effectively with others:
  • When interacting with customers and colleagues during the inspection process. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage my activities and myself:
  • When working according to flat rate schedules.
  • When managing resources and my time. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • When completing and processing documentation and liaising with customers. 
    		•

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • When using special service tools and equipment.
  • When using information technology. 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • When I can explain and justify my actions and procedures followed. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  64549   Further Education and Training Certificate: Automotive Body Repair  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Core  64411   Further Education and Training Certificate: Automotive Spray Painting  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  58539   Further Education and Training Certificate: Automotive Repair and Maintenance  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered"     		 2009-02-18  Was MERSETA until Last Date for Achievement 
    Elective  78525   Further Education and Training Certificate: Automotive Repair and Maintenance  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.