SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Operate an inspection process on a food automated packaging line 
SAQA US ID UNIT STANDARD TITLE
242790  Operate an inspection process on a food automated packaging line 
ORIGINATOR
SGB Food 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
10530  Operate the inspection and coding process on a food and beverages automated packaging line  Level 2  NQF Level 02  12   

PURPOSE OF THE UNIT STANDARD 
This unit standard is intended for a person working on a food or beverage automated packaging line who is responsible for performing a Inspection operation.

A person credited with this unit standard can safely:
  • Demonstrate knowledge of Inspection equipment.
  • Prepare and start Inspection equipment.
  • Operate Inspection equipment.
  • Shut down Inspection equipment.
  • Prepare for and perform changeovers on Inspection equipment. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Recommended minimum level NQF 1, Communication, Mathematics, Science and technology or equivalent. 

    UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of Inspection equipment. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The role of an inspection process is explained according to food or beverage packaging technology principles and practice. 

    ASSESSMENT CRITERION 2 
    The characteristics of raw material, the advantages and disadvantages of raw material, the hardness, durability and the rationale for the use of each packaging material utilised, is described according to packaging technology principles and practice. 
    ASSESSMENT CRITERION RANGE 
    Raw materials (Wet):
  • Glass Bottles
  • Plastic Bottles
  • Cans
  • Bags
  • Pouches
  • Barrels
  • Trays
  • Crates
  • Cartons
  • Pallets
  • Boxes
  • Buckets
  • Cartridges
  • Tubs
  • Ink and bar-Inspection strips

    Raw materials (Dry):
  • Glass Bottles
  • Plastic Bottles
  • Cans
  • Bags
  • Pouches
  • Barrels
  • Trays
  • Crates
  • Cartons
  • Pallets
  • Boxes
  • Buckets
  • Cartridges
  • Tubs
  • Wrapping
  • Ink and bar-Inspection strips
  • Cubes

    Services:
  • Electricity
  • Compressed Air
  • Water
     
    		•

    ASSESSMENT CRITERION 3 
    The composition of the Inspection equipment is described according food packaging technology principles and practice. 

    ASSESSMENT CRITERION 4 
    Production specifications and packaging requirements are described according to production plan and standard operating procedures. 

    ASSESSMENT CRITERION 5 
    Operating quality is checked and recorded and corrective action is taken as per standard operating procedure. 
    ASSESSMENT CRITERION RANGE 
    Quality:
  • Packaging raw material
  • Incoming process quality
  • Incoming Product
  • Control parameters
  • Codes not legible, visible and indellible
  • Services
  • Outgoing process quality
  • Products
  • Returnable Packaging Raw Material
  • Waste
     
    		•

    ASSESSMENT CRITERION 6 
    Deviations are identified, recorded and corrective action is taken as per standard operating procedure. 
    ASSESSMENT CRITERION RANGE 
    Deviations:
  • Quality
  • Equipment
  • Operating and process deviations
     
    		•

    ASSESSMENT CRITERION 7 
    Health Safety and Environmental standards are adhered to as per legislation. 
    ASSESSMENT CRITERION RANGE 
    Includes:
  • Occupational Health and Safety Act
  • National Environmental Management Act
  • Company Standards such as NOSA, ISO 9002 and ISO 14000
     
    		•

    SPECIFIC OUTCOME 2 
    Prepare and start inspection equipment. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Production plan is obtained and interpreted as per standard operating procedure before inspection equipment is prepared and started. 
    ASSESSMENT CRITERION RANGE 
    Production plan includes the following information, volumes, brands, shift information, packaging requirements, production specifications.
     

    ASSESSMENT CRITERION 2 
    Raw materials and services for production plan are sourced and available as per standard operating procedure. 
    ASSESSMENT CRITERION RANGE 
    Raw materials can be specified under two types of finished product "wet" or liquid packaging and "dry" products.

    Raw materials (Wet):
  • Glass Bottles
  • Plastic Bottles
  • Cans
  • Bags
  • Pouches
  • Barrels
  • Trays
  • Crates
  • Cartons
  • Pallets
  • Boxes
  • Buckets
  • Cartridges
  • Tubs
  • Ink and bar-Inspection strips

    Raw materials (Dry):
  • Glass Bottles
  • Plastic Bottles
  • Cans
  • Bags
  • Pouches
  • Barrels
  • Trays
  • Crates
  • Cartons
  • Pallets
  • Boxes
  • Buckets
  • Cartridges
  • Tubs
  • Wrapping
  • Ink and bar-Inspection strips
  • Cubes

    Services:
  • Electricity
  • Compressed Air
  • Water
     
    		•

    ASSESSMENT CRITERION 3 
    Inspection equipment is inspected for ability to produce as per standard operating procedure. 

    ASSESSMENT CRITERION 4 
    Inspection equipment is started as per standard operating procedure. 

    ASSESSMENT CRITERION 5 
    Health Safety and Environmental standards are adhered to as per legislation. 
    ASSESSMENT CRITERION RANGE 
    Includes:
  • Occupational Health and Safety Act
  • National Environmental Management Act
  • Company Standards such as NOSA, ISO 9002 and ISO 14000
     
    		•

    SPECIFIC OUTCOME 3 
    Operate inspection equipment. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Inspection equipment is operated as per standard operating procedure. 

    ASSESSMENT CRITERION 2 
    Quality is checked and recorded as per standard operating procedure. 
    ASSESSMENT CRITERION RANGE 
    Quality:
  • Packaging raw material
  • Incoming process quality
  • Incoming product
  • Control parameters
  • Services
  • Outgoing process quality
  • Products
  • Returnable packaging raw material
  • Waste
     
    		•

    ASSESSMENT CRITERION 3 
    Production inputs and outputs are measured and recorded as per standard operating procedure. 
    ASSESSMENT CRITERION RANGE 
    Inputs:
  • Packaging material
  • Incoming product
  • Control parameters
  • Services
  • Outputs
  • Products
  • Returnable packaging materials
  • Waste
     
    		•

    ASSESSMENT CRITERION 4 
    Deviations are identified, recorded and corrective action is taken as per standard operating procedure. 
    ASSESSMENT CRITERION RANGE 
    Deviations:
  • Quality
  • Equipment
  • Operating and process deviations
     
    		•

    ASSESSMENT CRITERION 5 
    Health Safety and Environmental standards are adhered to as per legislation. 
    ASSESSMENT CRITERION RANGE 
    Includes:
  • Occupational Health and Safety Act
  • National Environmental Management Act
  • Company Standards such as NOSA, ISO 9002 and ISO 14000
     
    		•

    SPECIFIC OUTCOME 4 
    Shutdown inspection equipment. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Inspection equipment is shutdown as per standard operating procedure. 

    ASSESSMENT CRITERION 2 
    Unused raw materials and waste are recorded and handled as per standard operating procedure. 
    ASSESSMENT CRITERION RANGE 
    Raw materials (Wet):
  • Glass Bottles
  • Plastic Bottles
  • Cans
  • Bags
  • Pouches
  • Barrels
  • Trays
  • Crates
  • Cartons
  • Pallets
  • Boxes
  • Buckets
  • Cartridges
  • Tubs
  • Ink and bar-Inspection strips

    Raw materials (Dry):
  • Glass Bottles
  • Plastic Bottles
  • Cans
  • Bags
  • Pouches
  • Barrels
  • Trays
  • Crates
  • Cartons
  • Pallets
  • Boxes
  • Buckets
  • Cartridges
  • Tubs
  • Wrapping
  • Ink and bar-Inspection strips
  • Cubes
     
    		•

    ASSESSMENT CRITERION 3 
    Shift handover is performed as per standard operating procedure. 

    ASSESSMENT CRITERION 4 
    Deviations are identified, recorded and corrective action is taken as per standard operating procedure. 
    ASSESSMENT CRITERION RANGE 
    Deviations:
  • Quality
  • Equipment
  • Operating and process deviations
     
    		•

    ASSESSMENT CRITERION 5 
    Health Safety and Environmental standards are adhered to as per legislation. 
    ASSESSMENT CRITERION RANGE 
    Includes:
  • Occupational Health and Safety Act
  • National Environmental Management Act
  • Company Standards such as NOSA, ISO 9002 and ISO 14000
     
    		•

    SPECIFIC OUTCOME 5 
    Prepare for and perform changeovers on inspection equipment. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Production plan is obtained and interpreted as per standard operating procedure before changeover is performed on Inspection equipment. 
    ASSESSMENT CRITERION RANGE 
    Production plan includes the following information, volumes, brands, shift information, packaging requirements, production specifications (verify julian code and shelf life).
     

    ASSESSMENT CRITERION 2 
    All the necessary tools, equipment, material and parts are prepared and available as per standard operating procedure. 

    ASSESSMENT CRITERION 3 
    Inspection equipment is changed over as per standard operating procedure. 

    ASSESSMENT CRITERION 4 
    Deviations are identified, recorded and corrective action is taken as per standard operating procedure. 
    ASSESSMENT CRITERION RANGE 
    Deviations:
  • Quality
  • Equipment
  • Operating and process deviations
     
    		•

    ASSESSMENT CRITERION 5 
    Health Safety and Environmental standards are adhered to as per legislation. 
    ASSESSMENT CRITERION RANGE 
    Includes:
  • Occupational Health and Safety Act
  • National Environmental Management Act
  • Company Standards such as NOSA, ISO 9002 and ISO 14000
     
    		•


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments at exit points of the unit standard, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in this Unit Standard. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Prepare and start inspection equipment:
  • Procedures for preparation and start-up of Inspection equipment.
  • Raw material: The Characteristics of Raw Material, the advantages and disadvantages of different raw material, the hardness, durability and rationale for the use of each packaging material utilised.

    Raw materials (Wet):
  • Glass Bottles
  • Plastic Bottles
  • Cans
  • Bags
  • Pouches
  • Barrels
  • Trays
  • Crates
  • Cartons
  • Pallets
  • Boxes
  • Buckets
  • Cartridges
  • Tubs
  • Ink and bar-Inspection strips

    Raw materials (Dry):
  • Glass Bottles
  • Plastic Bottles
  • Cans
  • Bags
  • Pouches
  • Barrels
  • Trays
  • Crates
  • Cartons
  • Pallets
  • Boxes
  • Buckets
  • Cartridges
  • Tubs
  • Wrapping
  • Ink and bar-Inspection strips
  • Cubes

    Operate inspection equipment:
  • Procedures for the operation of Inspection equipment.
  • Role of a Inspection process in the packaging of food.
  • Basic understanding of graphs and algebra, statistical techniques for sampling, and monitoring of process control and quality.
  • Basic understanding of cost and budgets.
  • Understand the cost of wastage, understand variance analysis.

    Shut down inspection equipment:
  • Procedures for shut down of Inspection equipment.

    Prepare for and perform changeovers on inspection equipment:
  • Procedures for preparation for and changeover of Inspection equipment. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identifying and solving problems in which responses display that responsible decisions using critical and creative thinking have been made. 

    UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team, group, organisation and community. 

    UNIT STANDARD CCFO ORGANISING 
    Organising and managing oneself and one's activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collecting, analysing, organising and critically evaluating information. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicating effectively using visual, mathematical and / or language skills in the modes of oral and / or written persuasion. 

    UNIT STANDARD CCFO SCIENCE 
    Using science and technology effectively and critically, showing responsibility towards the environment and health of others. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Understands the world as a set of related systems by recognising that problem solving contexts do not exist in isolation. 

    UNIT STANDARD CCFO CONTRIBUTING 
    Contributing to the full personal development of each learner and the social and economic development of the society at large by making it the underlying intention of any programme of learning to make an individual aware of the importance of:
  • Reflecting on and exploring a variety of strategies to learn more effectively.
  • Participating as responsible citizens in the life of local, national and global communities.
  • Being culturally and aesthetically sensitive across a range of social contexts.
  • Exploring education and career opportunities and Developing entrepreneurial opportunities. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 10530, which is "Operate the inspection and coding process on a food and beverage automated packaging line", level 2, 12 credits.

    Supplementary information

    Legal requirements:

    The following acts and/or codes, current and future regulations and amendments will be applicable:
  • Foodstuffs, Cosmetics and Disinfectants Act, No. 54 of 1972
  • Health Act, No 63 of 1977
  • Occupational Health and Safety Act, No. 85 of 1993
  • SABS Food Hygiene Management Code 49: 1989

    Definition of terms within this unit standard:

    Terminology: Clarification/ explanation/ definition:
  • Inspection equipment: An automated or semi automated machine on a packaging line that inspects a packaging process.
  • Wet: Refers to an automated or semi-automated packaging process that contains a liquid product.
  • Dry: Refers to an automated or semi- automated packaging process that contains foodstuffs, spices and condiments that are solid.
  • Food products safety practices and procedures: Refer to good manufacturing practices, monitoring critical control points, HACCP's, practices against food product contamination and personal hygiene.
  • Standard operating procedures: Refer to company procedures, prescribed procedures from the manufacturer, personal and food product safety procedures, good manufacturing practices, best practices, applicable legislation, time frames, recipes and specifications. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  80928   National Certificate: Confectionery (Chocolate, Sugar and Biscuit) Manufacturing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  FOODBEV 
    Elective  57694   National Certificate: Food and Beverage Packaging Operations  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  FOODBEV 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Competence Performance Consulting (Pty) Ltd 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.