All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Install, test and maintain a complex computer integrated manufacturing system

SAQA US ID	UNIT STANDARD TITLE
13114	Install, test and maintain a complex computer integrated manufacturing system
ORIGINATOR
SGB Food
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 06 - Manufacturing, Engineering and Technology			Manufacturing and Assembly
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 5	Level TBA: Pre-2009 was L5	20
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Reregistered"		2018-07-01	2023-06-30	SAQA 06120/18
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2024-06-30		2027-06-30

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

The skills, values and knowledge reflected in this unit standard are required by people in the field of mechatronics. The learning outcomes in this unit standard also contribute to the exit level outcomes required for the mechatronics NQF level 5 qualification. Qualifying learners can install, test and maintain a complex CIM system to conform to company specific requirements.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

This unit standard has been designed to be as part of a progression. It is one of a series of unit standards for activities at and above this level. The credits assigned to it are based on the assumption that the learner is learning what is needed for this unit standard as part of his/her learning for a range of related unit standards at this level.

UNIT STANDARD RANGE

The scope and level of this unit standard is determined by the ranges as indicated under the specific outcomes. The learner should be able to work autonomously and as part of a self-directed work team.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Read and interpret CIM system installation diagrams.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. System installed and working.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 2

2. CIM system programmed.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 3

3. Inspections carried out and recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 4

4. Repairs undertaken.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 5

5. Tests and measurements recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

SPECIFIC OUTCOME 2

Identify, select, install and integrate CIM sub-systems.

OUTCOME RANGE

Process includes electrical, pneumatic, electronic, robotic, information technology; energy and data lines; compatibility between sub systems; local area networks, hardware and software compatibility.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. System installed and working.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task

ASSESSMENT CRITERION 2

2. CIM system programmed.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task

ASSESSMENT CRITERION 3

3. Inspections carried out and recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task

ASSESSMENT CRITERION 4

4. Repairs undertaken.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task

ASSESSMENT CRITERION 5

5. Tests and measurements recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task

SPECIFIC OUTCOME 3

Test, measure and record information.

OUTCOME RANGE

Testing, measuring and recording of information includes electrical and pneumatic data and simulation tests

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. System installed and working.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 2

2. CIM system programmed.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 3

3. Inspections carried out and recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 4

4. Repairs undertaken.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 5

5. Tests and measurements recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

SPECIFIC OUTCOME 4

Programme CIM systems.

OUTCOME NOTES

Evaluate different implications of control Enter, edit and test programmes Monitor programme execution and eliminate faults

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. System installed and working.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 2

2. CIM system programmed.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 3

3. Inspections carried out and recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 4

4. Repairs undertaken.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 5

5. Tests and measurements recorded.

ASSESSMENT CRITERION RANGE

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

SPECIFIC OUTCOME 5

Maintain complex CIM systems.

OUTCOME NOTES

Inspect CIM sub-systems Check functions of safety devices and log tests Follow maintenance procedures Replace components subject to wear/failure Eliminate software errors Repair in accordance to operational sequences Adjust in accordance to changes in operational conditions Use diagnostic and maintenance systems

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. System installed and working.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 2

2. CIM system programmed.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 3

3. Inspections carried out and recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 4

4. Repairs undertaken.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 5

5. Tests and measurements recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

SPECIFIC OUTCOME 6

Work safely with due care for self, fellow workers, machines, equipment, materials and environment.

OUTCOME NOTES

6. Work safely with due care for self, fellow workers, machines, equipment, materials and the environment.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. System installed and working.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 2

2. CIM system programmed.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 3

3. Inspections carried out and recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 4

4. Repairs undertaken.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

ASSESSMENT CRITERION 5

5. Tests and measurements recorded.

ASSESSMENT CRITERION NOTES

Indicators: Correct components are selected and used Software and hardware are correctly installed Test equipment used correctly Appropriate documentation used Worked and communicated as part of a team Safe working practices are adhered to Correct tools are selected and used Break down time is kept to a minimum if at all Quality of process meets standards A clean and tidy work environment is maintained Understanding confirmed: Respond to 'what if' and 'why' questions covering: Processes and operational sequences Proportional CIM sub-systems System configurations Compatibility of hardware and software components and sub-systems Parameterisation Diagnostic procedures Test procedures Safety Maintaining quality and systems Break down analysis Improving and upgrading processes and quality Fault finding principles Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assuror who has jurisdiction over this field of learning. My assessor will (at the very least) be accredited and have a technical qualification in this learning area. I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment. I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace. I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

Names and functions of: Proportional CIM sub-systems Test equipment, diagnostic software Processes and operational sequences Quality requirements Break down time analysis Reports and relevant documentation Attributes, descriptions, characteristics and properties: System configurations Compatibility of hardware and software components Timing signals and behaviour Parameterisation Compatibility of sub-systems Sensory cues: Use of senses to detect faulty components Use of sight to read data Purpose of: Sub systems and components Operational sequences Quality processes Maintenance schedules Software and hardware upgrades Simulation Diagnostic procedures Communication processes Processes, events, causes, effects and implications: Causes of breakdowns Implications of incorrect diagnosing of faults Implication of not following quality processes Procedures and techniques: Maintenance procedures Testing procedures Application of testing programs Quality procedures Regulations, legislation, agreements, policies, standards: Control processes and standards Applicable safety, health and environmental protection legislation and standards Theory: rules, principles, laws: Principles of control processes Principles of fault finding principles Programming rules Safety standards Maintenance Relationship systems: Relationship between sub-systems and CIM systems Relationship between installation of CIM systems and production Relationship between production and quality Relationship between production and maintenance

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Identify and solve problems: Recognise situations that require corrective action

UNIT STANDARD CCFO WORKING

Work effectively with others: Contribute to workgroup efforts to maintain cleanliness, safety and quality Contribute to working in groups to determine a solution to an identified problem

UNIT STANDARD CCFO ORGANISING

Organise and manage myself and my activities: Apply correct procedures for using, storing and caring for test equipment, tools, maintenance, quality and CIM systems

UNIT STANDARD CCFO COMMUNICATING

Communicate effectively: Use common names for system components Use common names for test equipment Communicate with peers and management Fill in the necessary fault reports and material requisition forms

UNIT STANDARD CCFO SCIENCE

Use science and technology: Principles of electricity Mechanical technology Principles of process control Information technology

UNIT STANDARD CCFO DEMONSTRATING

Demonstrate an understanding of the world as a set of related systems: Relate the installation and maintenance of CIM systems to production and quality

REREGISTRATION HISTORY

As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015.

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Core	22773	National Certificate: Mechatronics	Level 5	Level TBA: Pre-2009 was L5	Passed the End Date - Status was "Reregistered"	2011-02-16	Was MERSETA until Last Date for Achievement
Core	79627	National Certificate: Mechatronics	Level 5	NQF Level 05	Passed the End Date - Status was "Reregistered"	2015-06-30	MERSETA
Elective	48730	National Certificate: Maintenance of High-speed Production Processes (Fast-moving Consumer Goods)	Level 5	Level TBA: Pre-2009 was L5	Passed the End Date - Status was "Reregistered"	2015-06-30	FOODBEV
Elective	48765	National Diploma: Maintenance of High-speed Production Processes (Fast-moving Consumer Goods)	Level 5	NQF Level 05	Passed the End Date - Status was "Reregistered"	2015-06-30	FOODBEV

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

NONE

---

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.