All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Clean evaporator vessels

SAQA US ID	UNIT STANDARD TITLE
114308	Clean evaporator vessels
ORIGINATOR
SGB Secondary Agriculture: Processing
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 01 - Agriculture and Nature Conservation			Secondary Agriculture
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 2	NQF Level 02	6
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Reregistered"		2018-07-01	2023-06-30	SAQA 06120/18
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2024-06-30		2027-06-30

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

A learner who has achieved this unit standard will be competent in: Cleaning of evaporator vessels to achieve optimum evaporator performance

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

To enter a learning programme for this unit standard or to be assessed against this unit standard, the learner is assumed to have: Literacy and communications NQF 1 Numeracy NQF 1 Basic understanding of sugar processing Basic knowledge of quality assurance systems An understanding of general safety in the workplace at NQF 1 or equivalent

UNIT STANDARD RANGE

The learner is expected to perform the specific outcomes as reflected in this unit standard without direct supervision, but with access to standard operating procedures.The scope of this unit standard extends to the mechanical cleaning of entrainment separators, condensers and other ancillary equipment used as part of the evaporation process.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Demonstrate an understanding of evaporator cleaning.

OUTCOME NOTES

Explaining scale formation Explaining the basic principles of evaporator cleaning State the steps taken in chemical cleaning of an evaporator train

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used: Understanding of: Scale formation Basic principles of evaporator cleaning Reasons for: Shutting down the evaporation station according to standard operating procedures Ensuring that scato scalers are in good working order and that operators have been inducted/trained in the correct use thereof, and/or Cleaning chemicals are prepared according to standard operating procedures Monitoring the automatic chemical cleaning cycle and reporting any deviations Repeating the pressure test after the tube repairs Preparing the evaporation station for start-up Consequences of not Adhering to safety procedures Inspecting the cleaned vessel and ensuring that non-conformances are corrected Pressure testing and identifying leaking tubes Reporting leaking/damaged tubes

SPECIFIC OUTCOME 2

Prepare for evaporator cleaning.

OUTCOME NOTES

Shutting down the evaporation station according to standard operating procedures Adhering to safety procedures Ensuring that scato scalers are in good working order

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used: Understanding of: Scale formation Basic principles of evaporator cleaning Reasons for: Shutting down the evaporation station according to standard operating procedures Ensuring that scato scalers are in good working order and that operators have been inducted/trained in the correct use thereof, and/or Cleaning chemicals are prepared according to standard operating procedures Monitoring the automatic chemical cleaning cycle and reporting any deviations Repeating the pressure test after the tube repairs Preparing the evaporation station for start-up Consequences of not Adhering to safety procedures Inspecting the cleaned vessel and ensuring that non-conformances are corrected Pressure testing and identifying leaking tubes Reporting leaking/damaged tubes

SPECIFIC OUTCOME 3

Mechanically cleaning evaporator vessels.

OUTCOME NOTES

Assisting during the cleaning activities of the cleaners Inspecting the cleaned vessel and ensuring that non-conformances are corrected

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used: Understanding of: Scale formation Basic principles of evaporator cleaning Reasons for: Shutting down the evaporation station according to standard operating procedures Ensuring that scato scalers are in good working order and that operators have been inducted/trained in the correct use thereof, and/or Cleaning chemicals are prepared according to standard operating procedures Monitoring the automatic chemical cleaning cycle and reporting any deviations Repeating the pressure test after the tube repairs Preparing the evaporation station for start-up Consequences of not Adhering to safety procedures Inspecting the cleaned vessel and ensuring that non-conformances are corrected Pressure testing and identifying leaking tubes Reporting leaking/damaged tubes

SPECIFIC OUTCOME 4

Chemically cleaning evaporator vessels.

OUTCOME NOTES

Cleaning chemicals are prepared according to standard operating procedures Initiating the automatic chemical cleaning cycle Monitoring the automatic chemical cleaning cycle and reporting any deviations

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used: Understanding of: Scale formation Basic principles of evaporator cleaning Reasons for: Shutting down the evaporation station according to standard operating procedures Ensuring that scato scalers are in good working order and that operators have been inducted/trained in the correct use thereof, and/or Cleaning chemicals are prepared according to standard operating procedures Monitoring the automatic chemical cleaning cycle and reporting any deviations Repeating the pressure test after the tube repairs Preparing the evaporation station for start-up Consequences of not Adhering to safety procedures Inspecting the cleaned vessel and ensuring that non-conformances are corrected Pressure testing and identifying leaking tubes Reporting leaking/damaged tubes

SPECIFIC OUTCOME 5

Complete cleaning of evaporator vessels.

OUTCOME NOTES

Pressure testing and identifying leaking tubes Reporting leaking/damaged tubes Repeating the pressure test after the tube repairs Preparing the evaporation station for start-up

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used: Understanding of: Scale formation Basic principles of evaporator cleaning Reasons for: Shutting down the evaporation station according to standard operating procedures Ensuring that scato scalers are in good working order and that operators have been inducted/trained in the correct use thereof, and/or Cleaning chemicals are prepared according to standard operating procedures Monitoring the automatic chemical cleaning cycle and reporting any deviations Repeating the pressure test after the tube repairs Preparing the evaporation station for start-up Consequences of not Adhering to safety procedures Inspecting the cleaned vessel and ensuring that non-conformances are corrected Pressure testing and identifying leaking tubes Reporting leaking/damaged tubes

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

An individual wishing to be assessed against this unit standard may apply to an assessor accredited by SETASA. Any training provider offering learning that will enable achievement of this unit standard must be registered and accredited by SETASA. Moderation of assessment will be done by SETASA in its ETQA capacity at its discretion.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

Basic principles in physics and chemistry as applied to scale formation and removal Standard operating procedures regarding evaporator cleaning Basic knowledge of scato scalers Basic knowledge the evaporator layout Basic safety requirements relating to evaporator cleaning

UNIT STANDARD DEVELOPMENTAL OUTCOME

N/A

UNIT STANDARD LINKAGES

N/A

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO WORKING

Work effectively with others as a member of a team to ensure effective evaporator cleaning.

UNIT STANDARD CCFO ORGANISING

Organising and managing oneself and one`s activities to ensure effective cleaning of evaporator vessels.

UNIT STANDARD CCFO COMMUNICATING

Communicate with others to ensure effective evaporator cleaning.

UNIT STANDARD CCFO DEMONSTRATING

Demonstrate an understanding of the world as a set of related systems regarding the effect of evaporator fouling on other processes/operations.

UNIT STANDARD ASSESSOR CRITERIA

N/A

REREGISTRATION HISTORY

As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015.

UNIT STANDARD NOTES

Values All learners should demonstrate: An application of company ethics, values as well as general safety and customer care principles An awareness of expectations and obligations of basic worker / management relationships

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Elective	48400	National Certificate: Sugar Processing	Level 2	NQF Level 02	Passed the End Date - Status was "Reregistered"	2023-06-30	AgriSETA

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

1.	RCL Foods-Sugar & Milling (MP)

---

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.