SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Standardise the fat content of a liquid dairy product 
SAQA US ID UNIT STANDARD TITLE
9143  Standardise the fat content of a liquid dairy product 
ORIGINATOR
SGB Food 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2004-10-13  2005-11-30  SAQA 0556/04 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2006-11-30   2009-11-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
120255  Standardise the fat content of a liquid dairy product  Level 3  NQF Level 03   

PURPOSE OF THE UNIT STANDARD 
A person credited with this unit standard is able to:
  • demonstrate knowledge of fat standardisation of liquid dairy products,
  • prepare for standardisation,
  • standardise a liquid dairy product,
  • perform end of standardisation procedures.

    This unit standard is for anyone who has to standardise the fat content of a liquid dairy product.

    This unit will contribute to the full development of the learner within the dairy manufacturing environment by providing recognition, further mobility and transportability within the field of manufacturing and assembly. The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and upliftment within the dairy manufacturing and processing environment. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Description of required skills:
    Basic calculating skills like dividing, multiplying, addition and ratio determination.
    Cream separation.
    Fat determination by means of the Gerber and Babcock test methods.
    Cleaning procedures, handling of equipment and chemicals.
    Representative sample taking for quality control purposes. 

    UNIT STANDARD RANGE 
    The scope of this unit standard is for anyone who has to standardise the fat content of a liquid dairy product.

    In the context of this unit standard, a liquid dairy product includes milk, cream and any other dairy based liquid mixture used for further processing into dairy products. Standardisation refers to in-line standardisation or silo/tank standardisation.

    The level assigned to this unit standard is appropriate because the process requires a range of well-developed skills and offers a significant choice of procedures. Some relevant theoretical knowledge, interpretation of available information, discretion and judgement, as well as a range of known responses to familiar problems are employed. The application of this unit standard is to qualify the person for certification in skilled occupations and sub-trades. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of fat standardisation of liquid dairy products. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. The purpose of fat standardisation of liquid dairy products is explained in terms of:
  • Legal requirements,
  • Consistency of product composition,
  • Profitability of production. 

  • ASSESSMENT CRITERION 2 
    2. Methods of standardising the fat content of liquid dairy products are described. 
    ASSESSMENT CRITERION RANGE 
    At least one examples are given for each of the following:
  • Removal of substances from liquid dairy products,
  • Addition of substances to liquid dairy products.
     

  • SPECIFIC OUTCOME 2 
    Prepare for standardisation. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Preparation of equipment and personal preparation is done according to standard operating procedures. 
    ASSESSMENT CRITERION RANGE 
    Personal preparation includes any practices that ensure hygiene, as well as personal and product safety.
     

    ASSESSMENT CRITERION 2 
    2. A sample is taken according to standard operating procedures. 

    ASSESSMENT CRITERION 3 
    3. Sampling equipment is handled according to standard operating procedures. 

    ASSESSMENT CRITERION 4 
    4. The sample is maintained in such a way that it meets the requirements of tests to be performed. 

    ASSESSMENT CRITERION 5 
    5. A representative sample is taken and the consequences of failing to do so are explained according to standard dairy principles. 

    ASSESSMENT CRITERION 6 
    6. The sample is dispatched to the designated area for analysis. 

    ASSESSMENT CRITERION 7 
    7. The amount of substances to be added or removed during the standardisation process is calculated according to standard operating procedures and is accurately established. 

    ASSESSMENT CRITERION 8 
    8. The principles and purpose of the relevant standardisation formulae and methodology are explained according to standard dairy principles. 

    SPECIFIC OUTCOME 3 
    Standardise a liquid dairy product. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. A liquid dairy product is standardised according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    2. Equipment and raw materials are handled according to standard operating procedures. 

    ASSESSMENT CRITERION 3 
    3. On completion of standardisation, the product complies with site-specific and legal requirements for further dairy processing. 

    ASSESSMENT CRITERION 4 
    4. Results of sample analysis are interpreted and a conclusion is drawn in terms of legal and site specifications for the product being standardised. 

    ASSESSMENT CRITERION 5 
    5. Records of the standardisation process are kept in accordance with standard operating procedures. 

    ASSESSMENT CRITERION 6 
    6. Common problems associated with standardisation are solved within scope of work and according to standard operating procedures. 
    ASSESSMENT CRITERION RANGE 
    Problem solving includes:
  • Recognition of signs of problems,
  • Identification of common problems, their causes and methods for prevention,
  • Description of the consequences of the problem.
     

  • ASSESSMENT CRITERION 7 
    7. Where standardisation is applied simultaneously with other production actions or processes, the standardisation process is synchronised according to standard operating procedures. 

    SPECIFIC OUTCOME 4 
    Perform end of standardisation procedures. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. The relevant equipment is cleaned and sanitised according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    2. Quality assurance parameters for cleaning and sanitising are monitored and controlled according to standard operating procedures. 
    ASSESSMENT CRITERION RANGE 
    Parameters to be monitored and controlled include:
  • Temperatures,
  • Flow rates,
  • Concentrations of cleaning agents.
     

  • ASSESSMENT CRITERION 3 
    3. Cleaning and sanitising materials are handled according to standard operating procedures.. 

    ASSESSMENT CRITERION 4 
    4. Cleaning equipment and materials are stored in designated areas according to work-site requirements. 

    ASSESSMENT CRITERION 5 
    5. Waste from the cleaning process is handled and disposed of according to standard operating procedures and safety requirements. 

    ASSESSMENT CRITERION 6 
    6. Records are kept according to standard operating procedures. 

    ASSESSMENT CRITERION 7 
    7. All the symptoms and possible causes of all faults, or potential faults, that occur during cleaning and sanitising are identified and corrective actions are taken within scope of work. 

    ASSESSMENT CRITERION 8 
    8. The equipment is left clean and ready for re-use in the designated area. 

    ASSESSMENT CRITERION 9 
    9. The work area is left in a safe and clea condition. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Internal moderation.
  • External moderation.
  • An assessor, accredited by the relevant ETQA, will assess the learner`s competency.
  • Assessment procedures will be supplied by the ETQA in alignment with NSB requirements.
  • All assessment activities must be fair, so that all candidates have equal opportunities.
    Activities must be free of gender, ethnic or other bias.
  • Assessment and moderation procedures, activities and tools must be transparent, affordable and support development within the field, sub-field and NQF.
  • Questions and answers to determine theoretical knowledge are expected.
  • Examination of an assessment portfolio.
  • Reporting skills are demonstrated by effective communication, using verbal (language) and/or writing skills.
  • Direct observation in simulated or actual work conditions.
  • Practical demonstration of standardising the fat content of a liquid dairy product. This unit standard can be assessed together with unit standards on pasteurisation or thermisation, cream separation or homogenisation. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Embedded knowledge is reflected within the assessment criteria of each specific outcome. 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems in which response displays that responsible decisions, using critical and creative thinking, have been made by:
  • Identifying and solving problems and faults within scope of work.

    Evident in the following specific outcomes:
  • Standardise a liquid dairy product.
  • Perform end of standardisation procedures. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community by:
  • Dispatching samples to the designated area for analysis.

    Evident in the following specific outcome:
  • Prepare for standardisation. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one`s activities responsibly and effectively by:
  • Preparing for standardisation.

    Evident in the following specific outcome:
  • Prepare for standardisation. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information by:
  • Evaluating the results from sample analyses and using it to determine the amount of substances to be added or removed from the product during standardisation,
    Evident in the following specific outcome:
  • Prepare for standardisation.
  • Evaluating the results from samples and making a conclusion on the efficiency of standardisation.
    Evident in the following specific outcome:
  • Standardise a liquid dairy product. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively by using mathematical and/or language skills in the modes of oral and/or written presentations by:
  • Keeping records.

    Evident in the following specific outcomes:
  • Standardise a liquid dairy product.
  • Perform end of standardisation procedures. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, showing responsibility towards the environment and health of others by:
  • Operating equipment safely,
  • Leaving the work area in a clean and safe condition.

    Evident in following specific outcomes:
  • Standardise a liquid dairy product.
  • Perform end of standardisation procedures. 

  • UNIT STANDARD CCFO CONTRIBUTING 
    Contribute to the full personal development of each learner and the social and economic development of the society at large.

    Evident in all specific outcome. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    UNIT STANDARD NOTES 
    This Unit standard has been replaced by unit standard 120255, which is Standardise the fat content of a liquid dairy product , Level 3, 7 credits.

    1. Legal requirements:

    The following acts and/or codes, current and future regulations and amendments will be applicable:
  • Foodstuffs, Cosmetics and Disinfectants Act, No. 54 of 1972,
  • Health Act, No 63 of 1977,
  • Occupational Health and Safety Act, No. 85 of 1993,
  • SABS Food Hygiene Management Code 49: 1989.

    2. Definition of terms within this unit standard:

    Terminology and clarification/ explanation/ definition.

    Liquid dairy products:
    Refer to milk, cream and any other dairy based liquid mixture used for further processing into dairy products.

    Standard operating procedures:
    Refer to company procedures, prescribed procedures from the manufacturer, personal and food safety procedures, good manufacturing practices, best practices, applicable legislation, time frames, recipes and specifications. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  20214   National Certificate: Food and Beverage Processing: Dairy Primary Processing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Registered" 
    2004-12-05  Was FOODBEV until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.