All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: |
Reline a mill |
SAQA US ID | UNIT STANDARD TITLE | |||
256669 | Reline a mill | |||
ORIGINATOR | ||||
SGB Mining and Minerals | ||||
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
- | ||||
FIELD | SUBFIELD | |||
Field 06 - Manufacturing, Engineering and Technology | Fabrication and Extraction | |||
ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
Undefined | Regular | Level 3 | NQF Level 03 | 12 |
REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
Passed the End Date - Status was "Reregistered" |
2018-07-01 | 2023-06-30 | SAQA 06120/18 | |
LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
2024-06-30 | 2027-06-30 |
In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard replaces: |
US ID | Unit Standard Title | Pre-2009 NQF Level | NQF Level | Credits | Replacement Status |
9570 | Reline a mill | Level 3 | NQF Level 03 | 12 |
PURPOSE OF THE UNIT STANDARD |
This unit standard will be useful to people who are responsible for relining a mill.
People credited with this unit standard are able to: |
LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
It is assumed that learners are already competent in:
|
UNIT STANDARD RANGE |
N/A |
Specific Outcomes and Assessment Criteria: |
SPECIFIC OUTCOME 1 |
Demonstrate knowledge relating to relining a mill. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The requirements pertaining to the relining process and the consequences of not adhering to the above are explained in terms of specified requirements. |
ASSESSMENT CRITERION 2 |
The importance of relining a mill is explained in terms of achieving relevant production requirements. |
ASSESSMENT CRITERION 3 |
Hazards and associated risks pertaining to the relining process are identified through relevant risk assessment procedures. |
ASSESSMENT CRITERION 4 |
The actions to be taken should hazards and risks be encountered are explained in terms of specified requirements. |
ASSESSMENT CRITERION 5 |
The relining components and their specifications are identified and their functions explained in the context of minerals processing. |
ASSESSMENT CRITERION 6 |
Lock-out procedures pertaining to the relining process and the consequences of non-compliance are explained in terms of specified requirements. |
ASSESSMENT CRITERION 7 |
The communication requirements pertaining to the relining process and the consequences of non-compliance are explained in terms of legal and site-specific requirements. |
ASSESSMENT CRITERION 8 |
The tools, equipment and auxiliary systems required for the relining process are identified and their functions explained in the context of minerals processing. |
ASSESSMENT CRITERION 9 |
The interlock system pertaining to the relining process is explained in terms of operational requirements. |
ASSESSMENT CRITERION 10 |
The security requirements pertaining to the relining process are explained in terms of legal and site-specific requirements. |
SPECIFIC OUTCOME 2 |
Determine relining requirements. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Personal protective and safety equipment is verified, examined and used in accordance with prescribed practices. |
ASSESSMENT CRITERION 2 |
Tools and equipment are verified, examined and used in accordance with prescribed practices. |
ASSESSMENT CRITERION 3 |
Workplace hazards and associated risks are dealt with in accordance with recommendations set out in the applicable risk assessment. |
ASSESSMENT CRITERION 4 |
Lock-out, mill access and exit are adhered to in accordance with standard task procedures. |
ASSESSMENT CRITERION 5 |
The liner components are examined and replacement requirements are determined and dealt with in accordance with standard task procedures. |
ASSESSMENT CRITERION 6 |
The security requirements pertaining to the mill inspection are met in accordance with legal and site-specific requirements. |
ASSESSMENT CRITERION 7 |
Occupational safety and health precautions towards self and others are maintained in accordance with specified requirements. |
ASSESSMENT CRITERION 8 |
The reporting requirements are met in accordance with legal and site-specific requirements. |
SPECIFIC OUTCOME 3 |
Prepare to reline a mill. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Personal protective and safety equipment is verified, examined and used in accordance with prescribed practices. |
ASSESSMENT CRITERION 2 |
Tools, equipment and replacement components are verified and examined in accordance with prescribed practices. |
ASSESSMENT CRITERION 3 |
Lock-out procedures pertaining to the relining process are adhered to and the consequences of non-compliance are explained in terms of specified requirements. |
ASSESSMENT CRITERION 4 |
Workplace hazards and associated risks are dealt with in accordance with recommendations set out in the applicable risk assessment. |
ASSESSMENT CRITERION 5 |
The security requirements pertaining to the relining process are met in accordance with legal and site-specific requirements. |
ASSESSMENT CRITERION 6 |
Minimum production down time, as a result of the relining process, is ensured through effective communication. |
ASSESSMENT CRITERION 7 |
Occupational safety and health precautions towards self and others are maintained in accordance with specified requirements. |
SPECIFIC OUTCOME 4 |
Reline a mill. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Personal protective and safety equipment is used in accordance with prescribed practices. |
ASSESSMENT CRITERION 2 |
Tools, equipment and auxiliary equipment are used in accordance with prescribed practices. |
ASSESSMENT CRITERION 3 |
Liner components are replaced in accordance with standard task procedures. |
ASSESSMENT CRITERION 4 |
Minimum production down time, as a result of the relining process, is ensured through effective communication. |
ASSESSMENT CRITERION 5 |
Work related hazards and associated risks are dealt with in accordance with recommendations set out in the applicable risk assessment. |
ASSESSMENT CRITERION 6 |
The security requirements pertaining to the relining process are met in accordance with legal and site-specific requirements. |
ASSESSMENT CRITERION 7 |
Problems encountered are dealt with in accordance with operational requirements. |
ASSESSMENT CRITERION 8 |
Occupational safety and health precautions towards self and others are maintained in accordance with specified requirements. |
SPECIFIC OUTCOME 5 |
Complete duties pertaining to the relining process. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Personal protective and safety equipment is dealt with in accordance with prescribed practices. |
ASSESSMENT CRITERION 2 |
Tools, equipment and auxiliary equipment are dealt with in accordance with prescribed practices. |
ASSESSMENT CRITERION 3 |
The security requirements pertaining to the relining process are met in accordance with legal and site-specific requirements. |
ASSESSMENT CRITERION 4 |
Redundant liner components are dealt with in accordance with standard task procedures. |
ASSESSMENT CRITERION 5 |
The mill is cleared for production in accordance with operational requirements. |
ASSESSMENT CRITERION 6 |
Good housekeeping practices are maintained in accordance with plant policy. |
ASSESSMENT CRITERION 7 |
Reporting and data-recording requirements are met in accordance with legal and site-specific requirements. |
UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
The following embedded knowledge will be assessed in an integrated way in the context of the unit standard:
Knowledge relating to relining a mill: Critical factors relating to relining a mill: Processes and events relating to relining a mill: Causes and effects (Occupational safety and health): Procedures and techniques relating to relining a mill: Regulations, legislation, agreements, policies and standards: |
UNIT STANDARD DEVELOPMENTAL OUTCOME |
N/A |
UNIT STANDARD LINKAGES |
N/A |
Critical Cross-field Outcomes (CCFO): |
UNIT STANDARD CCFO IDENTIFYING |
Identify and solve problems and make decisions using critical and creative thinking.
|
UNIT STANDARD CCFO WORKING |
Work effectively with others as a member of a team, group, organisation or community.
|
UNIT STANDARD CCFO COLLECTING |
Collect, analyse, organise and critically evaluate information.
|
UNIT STANDARD CCFO SCIENCE |
Use science and technology effectively and critically, thus showing responsibility towards the environment and health of others.
|
UNIT STANDARD CCFO DEMONSTRATING |
Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.
|
UNIT STANDARD ASSESSOR CRITERIA |
N/A |
REREGISTRATION HISTORY |
As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. |
UNIT STANDARD NOTES |
This unit standard replaces unit standard 9570, "Reline a mill", Level 3, 12 credits.
Terminology: Specified requirements include legal and site specific requirements and are contained in one or more of the following documents: Legal: Site Specific: |
QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
Elective | 62769 | National Certificate: Mineral Processing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MQA |
PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
NONE |
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |