SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Apply ignition paint onto skillets 
SAQA US ID UNIT STANDARD TITLE
117245  Apply ignition paint onto skillets 
ORIGINATOR
SGB Wood Products 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 1  NQF Level 01 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who can apply ignition paint onto skillets, whilst adhering to other agreed standards pertaining to performance, safety, quality, and the environment.

People credited with this unit standard are able to:
  • Set up to paint skillets
  • Fill and assemble ignition paint
  • Inspect printed skillets
  • Feed the skillets into the magazine and paint skillets
  • Inspect painted skillet
  • Pack completed skillets into a carton
  • Remove the ignition paint trough and components clean, and shut down machine 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:
  • Competency in communication and numerical skills equivalent to that of a person who has qualified in these subjects at an ABET level 4;
  • An understanding of the basic activities of the match manufacturing production process in their workplace;
  • Knowledge and skills in the relevant workplace procedures, health and safety measures equivalent to NQF level 1 requirements. 

  • UNIT STANDARD RANGE 
    The scope of the Unit Standard covers:
  • The whole environment that can be described as match manufacturing.
  • All the personnel involved in all activities of match manufacturing.
  • All the material that is handled and processed in this work area of match manufacturing.
  • All the company's work procedures and safety regulations relating to this work area of match manufacturing.
  • All the relevant OSHACT stipulations, which have bearing on, match manufacturing and all other activities in this work area.

    The context of the Unit Standard relates to the training of a Learner at NQF level 1 in the activity of match manufacturing.

    The level assigned to this Unit Standard, i.e. Level 1, is appropriate because it entails the training of a novice in match manufacturing is a progression of the skills acquired from Levels 1 to 4. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Set up to paint skillets. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Start the drying tunnel as per work instructions. 

    ASSESSMENT CRITERION 2 
    Ignition paint is collected from the ignition paint room as per production plan. 

    ASSESSMENT CRITERION 3 
    Ignition paint is mixed as per work instructions. 

    ASSESSMENT CRITERION 4 
    Ignition paint is tested for viscosity as per work instructions 

    SPECIFIC OUTCOME 2 
    Fill and assemble ignition paint. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The ignition paint troughs are assembled as per work instructions. 

    ASSESSMENT CRITERION 2 
    Assembled ignition paint trough is fitted to the machine as per work instructions. 

    ASSESSMENT CRITERION 3 
    Ignition paint is added into the ignition paint trough as per work instructions. 

    SPECIFIC OUTCOME 3 
    Inspect printed skillets. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Quality checks are conducted on printed skillets as per work instructions. 

    ASSESSMENT CRITERION 2 
    Skillets that are found to be defective are stacked aside for the Supervisor's inspection. 

    SPECIFIC OUTCOME 4 
    Feed the skillets into the magazine and paint skillets. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The skillets are packed into the magazine without being dropped and ensuring that the magazine is not overfilled as per work instructions. 

    ASSESSMENT CRITERION 2 
    The skillets are fed with the printed side facing down and the bar code on the right hand side of the operator. 

    ASSESSMENT CRITERION 3 
    The ignition paint trough is lifted until its lever locks it in place as per work instructions. 

    ASSESSMENT CRITERION 4 
    The machine is started if the tunnel temperature is between 60 and 120 ºC. 

    ASSESSMENT CRITERION 5 
    The counter is zeroed as per work instructions. 

    ASSESSMENT CRITERION 6 
    The pressure roller is engaged as per work instructions. 

    ASSESSMENT CRITERION 7 
    One skillet at a time is pulled out of the magazine without being turned and fed into the slide. 

    ASSESSMENT CRITERION 8 
    The skillet is painted evenly between the two centre creasing and on the left-hand side of the last creasing as per quality specifications. 

    ASSESSMENT CRITERION 9 
    The tunnel temperature is checked and recorded after every hour. 

    SPECIFIC OUTCOME 5 
    Inspect painted skillet. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Quality checks are conducted on painted skillets as per work instructions. 

    ASSESSMENT CRITERION 2 
    The painted skillet is checked immediately after it has come out of the tunnel to determine if it is dried completely. 

    ASSESSMENT CRITERION 3 
    Machine is reset if quality specifications do not conform to specifications as per work instruction. 

    SPECIFIC OUTCOME 6 
    Pack completed skillets into a carton. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Dried skillets are stacked into the carton ensuring that the ignition strips are aligned as per work instruction. 

    ASSESSMENT CRITERION 2 
    Skillet stacks are packed into the carton until the carton is full and the carton is closed, sealed and a skillet sample of the same brand is stuck to a carton. 

    SPECIFIC OUTCOME 7 
    Remove the ignition paint trough and components clean, and shut down machine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Ignition paint trough is removed as per work instructions. 

    ASSESSMENT CRITERION 2 
    Machine components are cleaned as per work instructions. 

    ASSESSMENT CRITERION 3 
    Machine is shut down as per work instructions. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual who wishes to be assessed against this Unit Standard may apply to, or inform, his immediate superior in the relevant workplace, to request management to arrange for his/ her assessment by the relevant assessor accredited for this purpose by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the relevant Education and Training Quality Assurer (FIETA ETQA) through formative and summative assessment by a registered Assessor. Assessment should be contextual and be conducted in the workplace as far as possible.

    The relevant NSB and SGB should be notified of any feedback related to this qualification.
  • Assessors must be registered as an Assessor with the relevant ETQA
  • Moderators must be registered as assessors with the relevant ETQA
  • Training providers must be accredited by the relevant ETQA
  • Moderation should include both internal and external moderation where applicable
  • The FIETA ETQA will co-ordinate all moderation activities in accordance with their policies and procedures 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    A demonstrated understanding of:

    Match manufacturing principles and practical application in the match manufacturing environment, in addition with knowledge of Safety/Environmental/Health issues.
  • ISO - Quality Awareness
  • Health and safety
  • Quality (S.A.B.S.) I.S.O 9002 quality system)
  • Production process 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems, using critical and creative thinking in the match manufacturing area. 

    UNIT STANDARD CCFO WORKING 
    Work effectively in a team, group, organisation or community. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, clean, store and deliver tools and instruments utilized in his/her work area in an effective and efficient manner. 

    UNIT STANDARD CCFO COMMUNICATING 
    Listen, understand instructions and verbally report in an effective manner to his/her superior. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    The Outcomes that Learners achieve will be judged subject to these being achieved:
  • Within the standard time prescribed by the organisation;
  • While following all the safety procedures required by the OSHACT and the workplace; and
  • Strictly according to the organisation's work instructions

    Values

    The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49082   GETC: Wood Products Processing  Level 1  NQF Level 01  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. AFRICAN MULTISKILLS DEVELOPMENT AND TRAINING 
    2. ENB TRAINING SERVICEPTYLTD 
    3. FUTURE DISCOVERY TRAINING ACADEMY 
    4. Imara Umbono Incorporated (Pty) Ltd 
    5. MGS GCABA CONTRACTING & TRADING CC 
    6. Optimi Workplace 
    7. TIRHANI SKILLSTRAINING PTY LTD 
    8. VEB CELE & ASSOCIATES PTY LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.