All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: |
Supply ignition paint and pack skillets |
SAQA US ID | UNIT STANDARD TITLE | |||
117239 | Supply ignition paint and pack skillets | |||
ORIGINATOR | ||||
SGB Wood Products | ||||
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
- | ||||
FIELD | SUBFIELD | |||
Field 01 - Agriculture and Nature Conservation | Forestry and Wood Technology | |||
ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
Undefined | Regular | Level 1 | NQF Level 01 | 3 |
REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
Passed the End Date - Status was "Reregistered" |
2018-07-01 | 2023-06-30 | SAQA 06120/18 | |
LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
2024-06-30 | 2027-06-30 |
In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard does not replace any other unit standard and is not replaced by any other unit standard. |
PURPOSE OF THE UNIT STANDARD |
This unit standard is for people who can supply ignition paint and pack skillets, whilst adhering to other agreed standards pertaining to performance, safety, quality, and the environment.
People credited with this unit standard are able to: |
LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:
i) Competency in communication skills equivalent to that of a person who has qualified in these subjects at an NQF 1; ii) An understanding of the basic activities of the match manufacturing production process in their workplace; iii) Knowledge and skills in the relevant workplace procedures, health and safety measures equivalent to NQF level 1 requirements. |
UNIT STANDARD RANGE |
a) The scope of the Unit Standard covers:
i) The whole environment that can be described as match manufacturing. ii) All the personnel involved in all activities of match manufacturing. iii) All the material that is handled and processed in this work area of match manufacturing. iv) All the company's work procedures and safety regulations relating to this work area of match manufacturing. v) All the relevant OSHACT stipulations, which have bearing on, match manufacturing and all other activities in this work area. b) The context of the Unit Standard relates to the training of a Learner at NQF level 1 in the activity of match manufacturing. c) The level assigned to this Unit Standard, i.e. Level 1, is appropriate because it entails the training of a novice in match manufacturing is a progression of the skills acquired from Levels 1 to 4. |
Specific Outcomes and Assessment Criteria: |
SPECIFIC OUTCOME 1 |
Set up procedure. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The buckets are checked to ensure that they are greased as per work instructions. |
ASSESSMENT CRITERION 2 |
The ignition paint is fetched from the ignition paint room as per work instructions. |
ASSESSMENT CRITERION 3 |
Empty stillages are at hand for packing of skillets as per work instructions. |
ASSESSMENT CRITERION 4 |
The stacking trays are checked as per work instructions. |
ASSESSMENT CRITERION 5 |
The stacking bar is checked that is between the clips on the take off chains as per work instructions. |
ASSESSMENT CRITERION 6 |
The waste bins are checked as per work instructions. |
SPECIFIC OUTCOME 2 |
Monitor and control quality of skillets. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Product that does not conform to quality specification is removed from machine and discarded as per work instruction. |
ASSESSMENT CRITERION RANGE |
Paint, print, cutting, creasing |
ASSESSMENT CRITERION 2 |
Product, which is incorrectly dated or not dated, is removed as per work instructions. |
ASSESSMENT CRITERION 3 |
Skillet samples are drawn and checked as per work instructions. |
ASSESSMENT CRITERION 4 |
Full tray is packed into stillage as per work instructions. |
SPECIFIC OUTCOME 3 |
Clean Machine Components. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Unused ignition paint is returned to the ignition paint room. |
ASSESSMENT CRITERION 2 |
The ignition paint buckets are washed as per work instructions. |
ASSESSMENT CRITERION 3 |
Components are washed as per work instructions. |
ASSESSMENT CRITERION 4 |
The waste bins are emptied and work area is cleaned as per work instructions. |
UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
An individual who wishes to be assessed against this Unit Standard may apply to, or inform, his immediate superior in the relevant workplace, to request management to arrange for his / her assessment by the relevant assessor accredited for this purpose by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the relevant Education and Training Quality Assurer (FIETA ETQA) through formative and summative assessment by a registered Assessor. Assessment should be contextual and be conducted in the workplace as far as possible.
The relevant NSB and SGB should be notified of any feedback related to this qualification. |
UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
A demonstrated understanding of:
Match manufacturing principles and practical application in the match manufacturing environment, in addition with knowledge of Safety/Environmental/Health issues. i) ISO - Quality Awareness ii) Health and Safety (Section 14) iii) S.A.B.S. ISO 9002 QUALITY SYSTEM (Work instruction) iv) Production process (Customer-Supplier relationship) |
UNIT STANDARD DEVELOPMENTAL OUTCOME |
N/A |
UNIT STANDARD LINKAGES |
N/A |
Critical Cross-field Outcomes (CCFO): |
UNIT STANDARD CCFO IDENTIFYING |
Identify and solve problems, using critical and creative thinking in the match manufacturing area. |
UNIT STANDARD CCFO WORKING |
Work effectively with others as a member of a team, group, organization or community in a production environment. |
UNIT STANDARD CCFO ORGANISING |
Organise and manage oneself and one's activities responsibly and effectively. |
UNIT STANDARD CCFO COLLECTING |
Collect, clean, store and deliver tools and instruments utilized in his/her work area in an effective and efficient manner. |
UNIT STANDARD CCFO COMMUNICATING |
Listen, understand instructions and verbally report in an effective manner to his/her superior. |
UNIT STANDARD ASSESSOR CRITERIA |
N/A |
REREGISTRATION HISTORY |
As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. |
UNIT STANDARD NOTES |
The Outcomes that Learners achieve will be judged subject to these being achieved:
i) Within the standard time prescribed by the organisation; ii) While following all the safety procedures required by the OSHACT and the workplace; and iii) Strictly according to the organisation's work instructions Values The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes. |
QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
Elective | 49082 | GETC: Wood Products Processing | Level 1 | NQF Level 01 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | FPMSETA |
PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
1. | ENB TRAINING SERVICEPTYLTD |
2. | FUTURE DISCOVERY TRAINING ACADEMY |
3. | Imara Umbono Incorporated (Pty) Ltd |
4. | MGS GCABA CONTRACTING & TRADING CC |
5. | Optimi Workplace |
6. | PINUS TECH TECHNOLOGIES TRADING AND PROJECTS |
7. | TIRHANI SKILLSTRAINING PTY LTD |
8. | VEB CELE & ASSOCIATES PTY LTD |
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |