SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Load and offload kilns 
SAQA US ID UNIT STANDARD TITLE
117199  Load and offload kilns 
ORIGINATOR
SGB Wood Products 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who load kilns with correct size timber in order to achieve an optimum production rate and offload kilns, whilst adhering to other agreed standards pertaining to performance, safety, quality, and the environment. People credited with this unit standard are able to:
  • Prepare kiln.
  • Load kiln.
  • Off load kiln. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
  • Competency in communication skills equivalent to that of a person who has qualified in these subjects at an ABET level 2.
  • An understanding of the basic activities of the charcoal and/or briquette manufacturing production process in their workplace.
  • Knowledge and skills in the relevant workplace procedures, health and safety measures equivalent to NQF level 1 requirements. 

  • UNIT STANDARD RANGE 
    The scope of the Unit Standard covers:
  • The whole environment that can be described as charcoal and/or briquette manufacturing.
  • All the personnel involved in all activities of charcoal and/or briquette manufacturer.
  • All the material that is handled and processed in this work area of charcoal and/or briquette manufacture.
  • All the company's work procedures and safety regulations relating to this work area of charcoal and/or briquette manufacturing.
  • All the relevant OSHACT stipulations, which have bearing on, charcoal and/or briquette manufacturing and all other activities in this work area.

    The context of the Unit Standard relates to the training of a Learner at NQF level 2 in the activity of charcoal and/or briquette manufacturing.

    The level assigned to this Unit Standard, i.e. Level 2, is appropriate because it entails the training of a novice in charcoal and/or briquette manufacturing is a progression of the skills acquired from Levels 2 to 4. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare kiln. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    All personal protective equipment is worn in accordance with OSH regulations and work instructions. 

    ASSESSMENT CRITERION 2 
    Ensure all tools and equipment are working to safety requirements and if a problem is detected the Foreman is notified as per work instructions. 

    ASSESSMENT CRITERION 3 
    The kiln is clean and ready for loading as per work instructions. 

    ASSESSMENT CRITERION 4 
    The timber is available and stacked close to the kiln as per work instructions. 

    ASSESSMENT CRITERION 5 
    The timber is carried to the kiln one at a time as per work instructions. 

    SPECIFIC OUTCOME 2 
    Load kiln. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The kiln is loaded in a set pattern in order to ensure an optimum burn rate as per work instructions. 

    ASSESSMENT CRITERION 2 
    The timber is cut with the saw into smaller pieces to be used as fillers in the kiln as required. 

    ASSESSMENT CRITERION 3 
    The filler pieces are inserted through the hole provided in the kiln roof until full as per work instructions. 

    SPECIFIC OUTCOME 3 
    Off load kiln. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Sufficient polybags are on hand to be used in the offloading of the kiln as per production requirements. 

    ASSESSMENT CRITERION 2 
    The polybags are opened and checked for any defects as per quality standards. 

    ASSESSMENT CRITERION 3 
    The polybags are filled with raw charcoal as per production requirements. 

    ASSESSMENT CRITERION 4 
    The polybags are moved to the designated area for storage and the remaining polybags stored for future use as per work instructions. 

    ASSESSMENT CRITERION 5 
    Work area is cleaned and ready for the next production run as per work instructions. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual who wishes to be assessed against this Unit Standard may apply to, or inform, his immediate superior in the relevant workplace, to request management to arrange for his / her assessment by the relevant assessor accredited for this purpose by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the relevant Education and Training Quality Assurer (FIETA ETQA) through formative and summative assessment by a registered Assessor. Assessment should be contextual and be conducted in the workplace as far as possible.

    The relevant NSB and SGB should be notified of any feedback related to this qualification.
  • Assessors must be registered as an Assessor with the relevant ETQA.
  • Moderators must be registered as assessors with the relevant ETQA.
  • Training providers must be accredited by the relevant ETQA.
  • Moderation should include both internal and external moderation where applicable.
  • The FIETA ETQA will co-ordinate all moderation activities in accordance with their policies and procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    A demonstrated understanding of:
  • Charcoal manufacturing principles and practical application in a charcoal and/or briquette manufacturing environment, in addition with knowledge of Safety/Environmental/Health issues. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    Operate as an efficient unit in carrying out the productions plan/programme in the kiln area. 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and verbally report problems he/she detects in the production process while performing his duties, to his/her immediate line manager. 

    UNIT STANDARD CCFO WORKING 
    Work efficiently and safely as a motivated member of a team in the kiln area. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, clean, store and deliver tools and instruments utilized in the kiln area in an effective and efficient manner. 

    UNIT STANDARD CCFO COMMUNICATING 
    Listen, understand instructions and verbally report in an effective manner to his/her line manager. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    The Outcomes that Learners achieve will be judged subject to these being achieved:
  • Within the standard time prescribed by the organisation.
  • While following all the safety procedures required by the OSHACT and the workplace.
  • Strictly according to the organisation's work instructions.

    Values:

    The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and the Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49082   GETC: Wood Products Processing  Level 1  NQF Level 01  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ENB TRAINING SERVICEPTYLTD 
    2. FUTURE DISCOVERY TRAINING ACADEMY 
    3. Imara Umbono Incorporated (Pty) Ltd 
    4. MGS GCABA CONTRACTING & TRADING CC 
    5. Optimi Workplace 
    6. TIRHANI SKILLSTRAINING PTY LTD 
    7. VEB CELE & ASSOCIATES PTY LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.